CFJ-2/3 powder ｂlowing machine is developed successfully by drawing on the excellent technology at home and abroad.

The machine atomizes the lubricating powder by automatic quantitative way, and uniformly sprays it on the surface of the mold before the mold contacts the material (the excess lubricating powder is sucked away by the dust-absorbing device), which greatly reduces the friction between the material and the surface of the mold during the molding process, and at the same time, solves the sticking between the material and the mold, and reduces the resistance of the material after the material is molded, and effectively reduces the load of the equipment and the heat generation.

It can be used in connection with all tablet presses online, and through the reasonable setting of parameters, it is the tablets in the molding without the phenomenon of sticky punch.

Equipment Principle:

CFJ-2/3 powder blowing machine is equipped with high-speed PLC and high-response sensor, which is convenient for users to set the required amount of atomized powder spraying on the human-machine interface, and the high-response sensor can quickly and accurately detect the passage of each punching die, and automatically and synchronously adjust the amount of atomized powder spraying within the time, to ensure that the die receives even powder.