Dr.Pharm

The 1060 series tablet press is a rotary three discharge high-speed tablet press that converts materials from granules/powders to tablets. It can press ordinary circular discs, large shaped discs, irregular discs, special shaped discs, single and double sided engraved discs, cartoons, etc; Suitable for traditional Chinese medicine granules, wet and dry granulation and tablet pressing. The equipment is suitable for the pharmaceutical, health products, electronics, food, and chemical industries.

Diversified feeder, double impeller / flower basket

Select according to powder characteristics

Synchronous/Servo Motor Configuration

Free choice by the customer as needed

Central lubrication system

Precise control of oil level at each point position

Mechanical pressure support

Prevent oil leakage pollution

Double pressure forming

Better tablet molding effect

Mirror treatment on the middle turret surface

Better solve the problem of powder dumping

Lower punch damping

Better loading precision and reduced vibration

Pressure overload protection

Better protection for equipment and personal installation

21" extra large Taiwan Advantech PC

Better HMI

Single/double/sandwiched tablet production

Consumer may select as needed, saving the cost

Same structure of main roller and prepressure roller

Interchangeable

Model Parameter	GZPT-76	GZPT-95	GZPT-113	GZPT-122
Number of punches	76	95	113	122
Mold model	D	B	BB	BBS
Output range (tablet/hour)	69700~697000	87200~872000	103700~1037000	150000~1500000
Maximum main pressure force (kN)	100			30
Speed range (RPM)	5.1~51			6.8~68
Maximum main pressure force (kN)	100
Maximum prepressure force (kN)	100
Max filling depth	20mm
Tablet thickness range	0.5 - 8.5mm
Max Tablet Diameter	Φ25mm	Φ16mm	Φ13mm	Φ11mm
Max long axis of shaped tablet	<25mm	<19mm	≤16mm	≤13mm
Middle diameter	Φ38.10mm	Φ30.16mm	Φ24.00mm	Φ22.00mm
Punch diameter	Φ25.35mm	Φ19.00mm	Φ19.00mm	Φ19.00mm
Punch length	133.60mm
No - load noise	≤78dB
Main motor power	18.5kW
Equipment dimensions	1720×1720×2182mm
Net weight of equipment	8000kg
Remarks	Capacity: The actual production speed of the equipment is related to the actual conditions of tablet pressing, such as the conditions of powder (fluidity, compressibility, uniformity of powder density), the shape and size of the produced tablet, and the pressing force. Mold use: For the same powder, the larger the tablet, the greater the pressing force required during production, resulting in the greater the friction between the punch and the guide rail, the greater the vibration of the equipment, and the greater the wear of the punch, guide rail and press wheel. Therefore, in the production of tablets, the service life of the mold shall also be considered while pursuing yield.