Dr.Pharm

The 370 series tablet press is a rotary single-discharging high speed tablet press, which can convert materials from granules/powder to tablets and press ordinary circular tablets, large tablets, shaped tablets, special shaped tablets, single and double sided lettering tablets and cartoon tablets and is suitable for wet and dry granulation and tablet pressing of TCM granules in the medicine, health care products, electronics, food and chemical industry. The 370 closed series can provide high containment class option.

Diversified feeder, single impeller/ double impeller / flower basket

Select according to powder characteristics

With/without hand wheel operation, Synchronization/Servo Motor Configuration

Free choice by the customer as needed

Central lubrication system

Precise control of oil level at each point position

Mechanical pressure support

Prevent oil leakage pollution

Double pressure forming

Better tablet molding effect

Mirror treatment on the middle turret surface

Better solve the problem of powder dumping

Lower punch damping

Better loading precision and reduced vibration

Pressure overload protection

Better protection for equipment and personal installation

21" extra large Taiwan Advantech PC

Better HMI

Max long axis of shaped tablet	<25mm	<19mm	≤16mm
Middle diameter	Φ38.10mm	Φ30.16mm	Φ24.00mm
Punch diameter	Φ25.35mm	Φ19.00mm	Φ19.00mm
Punch length	133.60mm
No - load noise	≤78dB
Main motor power	7.5kW
Equipment dimensions	820×1100×1940mm
Net weight of equipment	1700kg
Remarks	Capacity: The actual production speed of the equipment is related to the actual conditions of tablet pressing, such as the conditions of powder (fluidity, compressibility, uniformity of powder density), the shape and size of the produced tablet, and the pressing force. Mold use: For the same powder, the larger the tablet, the greater the pressing force required during production, resulting in the greater the friction between the punch and the guide rail, the greater the vibration of the equipment, and the greater the wear of the punch, guide rail and press wheel. Therefore, in the production of tablets, the service life of the mold shall also be considered while pursuing yield.